Skip to content

Make use of the full potential of your e-bike with BOSCH motors including the 4th generation!

By installing the Infinity Box chip you can easily remove the speed limit of 25 k/h. Simple installation and easy use are common features available to all our customers. Other benefits include:

  • Override of the 25 km/h speed limit
  • Displaying real values of measured parameters (e.g. current or average speed, trip etc.)
  • Immediate turn-off regardless of your riding style!
  • Compatible with INTUVIA, PURION, NYON, KIOX and COBI displays
  • Preserved WALK function!
  • Hidden installation mode
  • No need to uninstall the chip when updating or servicing your bike

BASIC PARAMETERS

  • Dimensions without cables (W x H x D): 21 x 36 x 9 mm
  • Supply voltage range: 5 – 15 V
  • Maximum consumption: 100 Ma
  • Maximum power: 1.5W
  • Weight: max. 20g
  • The voltage does not exceed 20V anywhere in the device, neither internally nor on the input/output pins.

INSTALATION:

The installation of Infinity Box is very simple and can be done at home. Our tuning kit uses connectors fully compatible with your bike’s motor. It does not need to be set up and no diagnostics need to be run during installation. All system configuration is carried out automatically.

The Infinity Box is connected by means of connectors of different colours to enable simple installation to your e-bike’s motor. The box is charged by your bike’s display power supply. After the installation of Infinity box, your display will show real data, such as current, average, and maximum speed or your trip.

Infinity Box is activated by pressing the WALK and – (2 seconds) or + – + – buttons in combination. Right after the activation the value of 9,9 km/h is displayed, and the original speed limit is deactivated. From now on you can ride your bike at unlimited speed. You can deactivate Infinity box in the same way. To deactivate the box, simply press WALK and – buttons (2Xs) or + – + – buttons in combination again. The value of 2,5 km/h will appear on the display and the box is deactivated.

The manual can be found here.
NOTICE
  • When operating e-bikes there might be a danger of many additional risks which normally do not occur during cycling. It is also necessary to bear in mind that using Infinity Box installed in an electric bicycle does not meet the requirements of EN 15194 +A1 standard and the power of an auxiliary electric drive will not be reduced or interrupted when reaching a speed of 25 km/h or more. Before installing and using any Infinity Box products, please make sure that their use is not in conflict with the laws of the country where you intend to use your e-bike.
  • In the EU member countries, an electric bike with an Infinity box installed is considered a small motorcycle, which means that when operating it on roads, it may be necessary to use a protective helmet, obtain a liability insurance (or other similar insurance), register such a vehicle and place a registration sticker on it. It is also necessary to have an appropriate driving license.
  • The producer bears no responsibility for damages caused by using Infinity Box products.
  • Electric bikes equipped with Infinity Box products are not allowed to be used on roads, bike paths and public spaces.
  • Electric bicycles equipped with Infinity Box products may be used exclusively on your own property and solely at your own risk.
LEGISLATION
  • This manual is an integral part of the purchased equipment. The device is not an independently functioning unit.
  • By using the Infinity Box device, its user undertakes to use the modified e-bike in accordance with the applicable legislation of the given country. This device can be used only outside of public roads, which means exclusively on private property or on land designated for that purpose.
  • The user also acknowledges that operating the bike outside of their own property, even with the Infinity Box device turned off but installed, may not be in accordance with the legislation of the given country. The manufacturer takes no responsibility for any damages resulting from the use of Infinity Box products, which might result in losing your electric bike warranty. The manufacturer claims no responsibility for any damage, whether to health or property, associated with the installation or use of this device. The producer holds a certificate of electromagnetic compatibility tests in compliance with EU regulations.

CONTACT FORM

INFINITY BOX

Our team of experienced designers, technicians and sales representatives are united by one common passion: riding e-bikes. As we like taking on new challenges, we have decided to develop and design Infinity Box chips that push your speed to the limit of infinity!